Air Saving Impact Blow Gun IBG
Card Motor LAT3
Card Motor LAT3
Click here for more detail of Card Motor LAT3
Click here for more FAQ of products
New Product Launching
| Bernoulli Gripper with Coanda Grip ZNC-C Series
|It reduces the impact of airflow on lightweight workpieces and adjacent workpieces and prevents lateral slide when suctioning the workpiece. There is no risk of suctioning of powder matter adhering to the workpiece into the device and pipe, as the workpiece is suctioned while air is blown.
Body material: Stainless steel, Aluminium with Coanda grip to prevent blowing away of the workpiece before suctioning and lateral sliding of the workpiece during suctioning.
| SMC Air Grippers for Collaborative Robots RMH Series
|It unitizes peripheral devices required to operate the gripper. Operation is simple to use by connecting one air supply tube and one electrical wire. It has built-in solenoid valve, exhaust throttle valve with silencer, auto switch, fitting, etc.
It has three types of grippers available for use with a variety of workpieces with the collaborative robots of 12 brands’ companies.
It has a manual changer built-in as standard to allow easy tool change for labour saving.
It also reduces air consumption by up to 80%.
| Flow Controller for Air PFCQ Series
|This Flow Controller for Air has a built-in linear motor that changes the valve opening by moving the valve element mounted to the linear motor, thereby adjusting the flow rate inside the valve.
When the flow rate command signal is input to the product, the internal operation circuit performs a comparison calculation with the flow rate measured by the flow sensor.
The product drives the linear motor based on that value to control the flow rate. When the linear motor is de-energized, the valve is closed by the attractive force of the permanent magnet mounted to the linear motor (Normally closed).